|use life:||10-20 years||coating layer:||2 top/2 back or 2 top /1back|
|Paint type:||PE, HDP, SMP, HPC, PVDF||Coated:||ZN40-275g or AZ30g-180g|
Prepainted printed steel sheet, also called printed sheet, is prepared by being coated with a layer of paint and baked pattern is printed out using the gravure technologies, then a layer of clear lacquer is coated and after being baked again, color-coated printed steel sheet is obtained.
Patterns are typical wood texture (as shown in the figure). Special requirements from customers may be met via negotiation and research otherwise.
Paint:PE or PVDF
Base metal: Galvanized steel, Galvalume steel, aluminium sheet
Mainly applied to decoration for interior and exterior walls and indoor items.
|Base metal||GI, GL, Alu sheet|
|Coil ID||508mm, 610mm|
|Layers of the coating||
2/2(2 layers of top coating/2 layers of bottom coating);
2/1(2 layers of the top coating, 1 layer of bottom coating);
|pattern||According to customers’ request|
|Paint||PE, HDP, SMP, HPC, PVDM|
|Thickness of the coating||25um-75um|
Each bare coil to be securely tied with two bands through the eye of coil (or not) and one circumferential, the contact points of these bands on the coil edge to be protect with edge protectors. Coil then to be properly wrapped with water proof /resistant paper, it then to be properly and completely metal wrapped. And each packed coil to be properly wrapped with band, three-six such band through the eye of coil at about equal distance, and two-four such bands securely tied around belly of coil at about equal distance.
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account information)
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Other stock information please click here : latest stock information
Mobile/Viber/Whatsapp: +86 18012353378